Mydro Lab Reservoir Bundle

Description

This Bundle includes everything in the “Full Bundle” except for the Climate Controller and Temp/RH sensor.

What you receive:

1 x Mydro Lab Master (with power adapter)

1 x Mydro Lab Reservoir Controller (with power cable and sensors listed below)
1 x Waterproof temperature probe
1 x Industrial grade EC probe
1 x Float sensor kit (high and low level water sensors)

1 x Mydro Lab Multi Doser (with power adapter and 15m dosing tube)

pH probe purchased separately (see online store)

The Mydro Lab is the best hydroponics controller in the business. That goes for climate control and it especially goes for auto dosing. Our auto dosing system has separate “Run to Waste” and “Recirculating” modes with sub settings for straight perlite, NFT, DWC, bubbleponics, aeroponics and flood & drain. It can handle up to 4 reservoirs with 10 dosing pumps per reservoir. Each dosing pump can run pH up, pH down, nutrients and additives. Fully customizable from the Mydro Lab Master. And the best part is that our system provides FULL CYCLE AUTOMATION.

Hydroponics is a cyclic process where you get to the end of the cycle and then start again. Like going around a race track and then starting a new lap. Because the Mydro Lab can complete a full cycle, this means it can do lap after lap without any human input. It can run for many months completely by itself.

For “Run to Waste” systems this means that after your reservoir has been used up, it will automatically be refilled, temperature adjusted, prepped with your custom line up of nutrients/additives, pH balanced, then your feeding schedule is resumed while pH is maintained.

For “Recirculating” systems this means that you set a reservoir change period. Let’s say you set it to 10 days. So every 10 days your reservoir will be drained out, refilled, temperature adjusted, prepped with your custom line up of nutrients/additives, pH balanced and then your feeding schedule will be resumed while maintaining pH, EC, water temperature and water level.
Which means that this system also takes care of your water top ups. No need for a ball float valve.

We use high grade industrial pH and EC probes and our controller can run a mix/stir pump that activates when needed. So you don’t need to run a “sample pot” like with all other systems. Sample pots are separate mini reservoirs that require the use of a constantly running pump flowing from your main reservoir. This creates the risk of leaks and flooding.

The Mydro Lab Climate Controller is also very impressive. It can run your air conditioner, vent fan, heater, humidifier, dehumidifier, CO2 with fuzzy logic, grow lighting and a cycle timer for wall fans ect.
It has many features such as intelligent decision making between use of air conditioning and vent fans. It has different grow modes such as “AC Sealed” for sealed rooms with CO2. It has “Smart Fan + CO2” for people running CO2 with a non sealed room, and several other modes.
It gives you the option of night time CO2 venting. So during lights off it will use a vent fan to bring in fresh air.
One of the nicest features is the electricity meter. You can see how much electricity you have used in dollars and cents from the Mydro Lab Master and then reset the meter at the touch of a button. It has power saving modes where it will never use an air conditioner with a dehumidifier. And so many more features that you will find useful.